Help Centre · Controls

How to use the controls.

Three buttons. That's it. Power on, set your pressure, hit start. The Inflato Mini handles the rest, plus a couple of hidden double-tap shortcuts most people miss.

3 Buttons
Up · Down · Start
Auto-stop
Hits your target exactly
PSI or BAR
Switch in one tap
LED light
Built in for night rides
The Three Buttons

Every button, what it does.

Each button does one thing on a tap and a second thing on a double tap.
Top button
▲
Pressure Up
Tap
Increase the target pressure. Hold it down to scroll faster.
Double tap
Toggle the LED light on or off. Built into the front for low-light fixes.
Bottom button
▼
Pressure Down
Tap
Decrease the target pressure. Hold it down to scroll faster.
Double tap
Switch between PSI and BAR. Your last choice is remembered.
Round button
O
Main Button
Hold
Turn the pump on or off. Hold for about a second until the screen wakes or sleeps.
Tap (when on)
Start or stop inflating. The Mini runs to your set pressure and stops automatically.
Step by step

From off to inflated, in four moves.

01
Turn it on
Hold the O button until the screen lights up.
02
Set the pressure
Tap ▲ or ▼ to dial in your target PSI or BAR.
03
Start pumping
Tap O again and the Mini begins inflating immediately.
04
Done automatically
It stops on its own when the target is hit. Pull the head off and pack it up.
Hidden features

Two shortcuts most people miss.

A double tap on either arrow button unlocks an extra mode. Worth knowing for night rides and metric riders.
▲
Double tap ▲
Turn the LED light on or off
Front-mounted LED for low-light roadside fixes. Stays on until you double-tap to turn it off. Works while the pump is running too.
▼
Double tap ▼
Switch between PSI and BAR
Toggle units instantly. Defaults to PSI but remembers your last choice next time you switch the pump on.
Common questions

Quick answers, before you ask.

? How do I switch from PSI to BAR?
With the pump on, double tap the ▼ button. The display will swap to your chosen unit immediately. The Mini remembers your preference, so it'll stay on BAR (or PSI) next time you switch the pump on.
? How do I turn the LED light on?
Double tap the ▲ button. The LED stays on until you double tap it again to turn it off. It works whether you're actively pumping or just have the pump powered on.
? Can I stop the pump mid-inflation?
Yes. Tap the O button while it's running and the pump stops immediately. The current pressure reading stays on the display so you can decide whether to keep going.
? The screen went black on its own. Did the pump die?
Probably auto-sleep. The Mini powers the screen down after about 60 seconds of inactivity to save battery. Hold the O button to wake it back up. Your last pressure setting is remembered.
? What's the max pressure I can set?
120 PSI (about 8.3 BAR). That's well above what road, MTB and e-bike tyres need, and comfortably above what most sports balls need too. The Mini caps at 120 to keep things safe.
? What if I start the pump without setting a pressure?
The Mini uses your last saved pressure. If you've never set one, it defaults to a sensible starting point on the unit (PSI or BAR) you have it on. Always glance at the display before tapping O to confirm it's the value you want.
Still got a question? We're here to help.
Real humans, AU business hours, 24-hour reply window.
Contact Support